NEC 2300 DL - Manual (Page 136)

Repacking the Printer 128
3
Unhook the support wire.
4
Close the right-side door.
5
Open the duplex option’s cover and
loosen the two thumbscrews until the
duplex option moves freely away from
the right side of the printer.
6
Lift duplex option up and away from the
printer.
7
Install the original right-side cover that
came with the printer with two screws.
8
Repack the duplex option in its original
shipping carton for storage or shipment.
"#
If you’re returning the printer for
service, you don’t need to return the
duplex option, unless the problem is
with the duplex option.
Lower Feeder Unit
"#
If you don’t have a lower feeder unit installed, skip to the next section.
1
Slide tray 2 out of the printer and remove the media.