NEC 2300 DL - Manual (Page 66)

Replacing Consumables 58
Replacing the Waste Toner Bottle
When the waste toner bottle becomes full, the message WASTE TONER BOX
FULL appears. The printer will stop and will not start again until the waste
toner bottle is replaced.
Removing the Used Waste Toner Bottle
1
Open the printer’s front door.
2
Grasp the waste toner bottle’s handle and
lift it up, and then carefully remove the
waste toner bottle.
Keep the waste toner bottle upright so the
toner does not spill.
3
Remove the two caps by turning them
counterclockwise.
4
Secure the two caps onto the two holes by
turning them clockwise.