NEC 2300 DL - Manual (Page 70)

Ordering Consumables 62
4
Press on the front handle of the OPC
drum cartridge with one hand and hold
the handle of the OPC protective cover
with the other hand.
5
Peel the protective cover handle straight
toward you.
"#
Dispose of it properly according to
your local regulations.
6
Rotate the transfer belt release lever
counterclockwise to its correct position
(7 o’clock).
This lowers the transfer belt.
Attention
If the transfer belt release lever is not at its correct position
(7 o’clock), the waste toner bottle cannot be installed.
7
Install a new waste toner bottle (see page 59).
"#
The printer must complete a 150-second calibration cycle after any
consumable has been replaced. If you open the door before the
message window reads
IDLE/MAGICOLOR 2300DL , the
printer stops and repeats the calibration cycle.
Ordering Consumables
Choosing the right consumables for your printer not only increases its
reliability and performance, but also minimizes the risk of damage. For
example, only MINOLTA-QMS toner cartridges are designed to meet the
exact specifications of your MINOLTA-QMS printer, giving maximum
performance, efficiency, and long life.
Toner cartridges and other consumables for your printer are available from
your local vendor or Q-SHOP (www.q-shop.com).
See the Service & Support Guide for a list of sources of service and support
in the Americas. The most up-to-date worldwide information can be found at
www.minolta-qms.com.