NEC LT180 - Manual (Page 22)

E-15
2. INSTALLATION AND CONNECTIONS
To connect SCART output (RGB)
PC CONTROL
COMPONENT IN
COMPUTER IN
VIDEO IN
S-VIDEO IN
R
Cr/Pr
Cb/Pb Y
L
AUDIO IN
AC IN
MONITOR OUT
COMPUTER IN
AUDIO IN
AUDIO OUT
Video equipment such as
DVD player
Commercially available SCART cable
Female
ADP-SC1
Projector
Before connections: An exclusive SCART adapter (ADP-SC1) and a commercially available SCART cable are
required for this connection.
NOTE: Audio signal is not available for this connection.
1. Turn off the power to the projector and your video equipment.
2. Use the NEC ADP-SC1 SCART adapter and a commercially available SCART cable to connect the COMPUTER
input of your projector and a SCART output (RGB) of your video equipment.
3. Connect the supplied power cable. See page E-19 .
4. Turn on the power to the projector and your video equipment.
5. Use the SOURCE button on the projector cabinet to select the COMPUTER input.
6. Press the MENU button on the projector cabinet to display the menu.
7. From the menu, select [Advanced]
→
[Signal Select]
→
[Computer]
→
[Scart].
SCART is a standard European audio-visual connector for TVs, VCRs and DVD players. It is also referred to
as Euro-connector.
NOTE: The ADP-SC1 SCART adapter is obtainable from your NEC dealer in Europe. Contact your NEC dealer in Europe for
more information.