NEC LT180 - Manual (Page 43)

E-36
5. USING ON-SCREEN MENU
Selecting Aspect Ratio [Aspect Ratio]
Aspect Ratio allows you to select the best Aspect mode to display your source image.
You can also display the Aspect Ratio window by pressing the ASPECT button on the remote control. (See
page
E-7 ).
Normal
Standard
4:3 Aspect
When 16:9 is selected
from the source (i.e. DVD
player), the following
selections will display:
Normal
16:9 image
displayed in 4:3
mode
Cinema Native
Left and right
stretched
Cinema
Left and right
stretched to display
the true aspect
Native (RGB only): Turns off the Advanced AccuBlend feature. The projector displays the current image in its
true resolution.
NOTE:
• When you are displaying an RGB image with a higher resolution than the projector's native resolution, the image will be
displayed in "Normal" even if "Native" is selected. (Advanced Accublend will be incorporated)
Only when displaying an RGB image with a lower resolution than the projector's native resolution, will the image be able to
be displayed in its true resolution "Native".
• When "Normal" is selected, an HDTV (1080i/720p) signal will be shown in its true aspect, as is the case when selecting
"Cinema".
• You can adjust the image position for Cinema aspect. See “Cinema Position” for setting the image position.
Copyright
Please note that using this projector for the purpose of commercial gain or the attraction of public attention in a venue such as
a coffee shop or hotel and employing compression or expansion of the screen image with a "Aspect Ratio" setting may raise
concern about the infringement of copyrights which are protected by copyright law.
Adjusting the Vertical Position of Image [Cinema Position] (for Cinema only)
This feature adjusts the vertical position of the image when viewing video with Cinema aspect ratio selected.
When “Cinema” is selected in “Aspect Ratio”, the image is displayed with black borders on the top and bottom.
You can adjust the vertical position between top and bottom.
NOTE: This option is available only when “Cinema” is selected in Aspect Ratio.
When 4:3 is selected
from the source (i.e. DVD
player), the following
selections will display: