NEC LT180 - Manual (Page 39)

E-32
5. USING ON-SCREEN MENU
6. Repeat steps 2-5 to adjust an additional item, or press the EXIT button several times to close the menu.
Slide bar
Solid triangle
Return key symbol
Radio button
For Adjusting items (Slide bar)
Slide bar ........ Indicates settings or the direction of adjustment.
• Use the SELECT
̇̈
buttons to adjust the item.
For Selecting items (Solid triangle)
Solid triangle .. Indicates further choices are available. A highlighted triangle indicates the item is active.
• Use the SELECT
̇̈
buttons to select the item.
For Selecting items (Return key symbol, Radio button)
Return key symbol ........ Indicates further choices are available.
Radio button ................. Use this round button to select an option in a dialog box.
1) Press the ENTER button. The selected item will be displayed.
2) Use the SELECT
̆̄ buttons to highlight the item you want to set.
Changes are stored until you adjust it again.
Press the EXIT button to return to the previous screen.
AUTO
ADJ.
SELECT
AUTO
ADJ.
SELECT SOURCE
5. Adjusting the level of a selected item or selecting an item.
NOTE: Menu windows have the following elements.
ᕡ Source ............................................... Indicates the currently selected source.
ᕢ Off Timer remaining time ................... Indicates the remaining countdown time when the Off Timer is preset.
ᕣ Key symbol ........................................ Indicates the Cabinet Button is locked.
ᕡ ᕢ ᕣ