N-Tron 9000 Series - Manual (Page 107)

5/17/2007 page 107 of 138
Get Flow Control
Command Name port get flowcontrol
Description Displays the current flow control settings on a given port.
Syntax port get flowcontrol <port-no>
Parameters port-no
port number (1 ~ 24)
Examples N-TRON/Admin#[1]> port get flowcontrol 6
NOTES Check whether port-no is in the valid range. (1 ~ 24)
Get Name
Command Name port get name
Description Displays the name of a given port.
Syntax port get name <port-no>
Parameters port-no
port number (1 ~ 26)
Examples N-TRON/Admin#[1]> port get name 6
NOTES Check whether port-no is in the valid range. (1 ~ 26)
Get State Of Priority
Command Name port get stateofpriority
Description Displays the priority state of a given port number.
Syntax port get stateofpriority <port-no>
Parameters port-no
port number (1 ~ 26)
Examples N-TRON/Admin#[1]> port get stateofpriority 6
Priority State of Port[6] is : [disabled]
NOTES Check whether port-no is in the valid range. (1 ~ 26)
Get Intruder State
Command Name port get intruderstate
Description Displays whether the intruder log is enabled or disabled.
Syntax port get intruderstate
Parameters None
Examples N-TRON/Admin#[1]> port get intruderstate
Intruder Log : Disabled
NOTES
Get Priority Level
Command Name port get prioritylevel
Description Displays the priority level on a given port.
Syntax port get prioritylevel <port-no>
Parameters port-no
port number (1 ~ 26)
Examples N-TRON/Admin#[1]> port get prioritylevel 6
Priority Level of Port[6] is : [1]
NOTES Check whether port-no is in the valid range. (1 ~ 26)
Get STP Status
Command Name port get STP Status
Description Displays the Spanning Tree Protocol Status on a given port.
Syntax port get stpstatus <port-no>
Parameters port-no
port number (1 ~ 26)
Examples N-TRON/Admin#[1]> port get stpstatus 6
Stp state of [6] port is : [Forward]
NOTES STP states include: Listening, Learning, Blocking, & Forwarding
Get Back Pressure
Command Name port get backpressure