N-Tron 9000 Series - Manual (Page 38)

5/17/2007 page 38 of 138
VLAN – Port Based
The Port Based tab under the VLAN category shows all the VLANs that are configured on the
switch and details about the VLANs such as port numbers and tagged VLAN settings.
To add a VLAN simply click on the Add button on the page above and fill in the desired fields. The
example below would set up a basic port based VLAN for ports A1-A6.
(See VLAN Configuration Examples on Page 133)
Note: When implementing overlapping VLANs, RSTP can only be enabled on one of the VLANs that is
overlapping others. RSTP can not be implemented on a VLAN that contains other VLANs within
that one. Changing anything on a VLAN will turn on RSTP on all VLANS as a precautionary
measure.