Nikon NP64 - Manual (Page 58)

49
5. Using the Viewer (NP64/NP54)
❺ Using the Bluetooth ® wireless technology to transmit images
Overview
Connecting the optional Bluetooth® USB adaptor (NP01BA) to the USB port (Type A) of the projector will allow you
to transmit images wirelessly from your computers or mobile phones with Bluetooth wireless technology to the
projector.
[Important]
• If you remove the Bluetooth® USB adaptor from the projector, all the images that the projector received
will be deleted.
• When the projector goes into the standby mode or when the AC power supply is turned off, all the re-
ceived images will be deleted.
• Received images cannot be stored to the projector.
• The maximum available space for received images in all is 6MB. One image must not exceed 2.5MB in
size.
• If the projector is receiving images beyond the space limit during the transmission, the oldest image will
be deleted and will receive a new image. When the image is received, a confirmation message will not be
displayed.
Typical Specifications of Bluetooh® USB Adaptor
Model name NP01BA
Standard Bluetooth Ver.2.0+EDR
Transmission method FH-SS (Frequency-Hopping Spread Spectrum)
Frequency range 2.4GHz band (2402-2480MHz)
Transmission output 2.5mW, Class2
Supported profiles
BIP (Basic Imaging Profile)
OPP (Object Push Profile)
Communication distance
Approx. 10m/33 feet (*The communication distance may vary depending on the environ-
ment.)
Dimensions 17.6 mm/0.69”(Width) x 9.0 mm/0.35”(Height) x 56.3 mm/2.22”(Depth)
Weight 6g/0.2 oz
Use environment
Temperature: 0°C to 40°C/ 32°F to 104°F
Humidity: 20 to 80% (non-condensing)
Storage environment
Temperature: -10°C to 60°C/14°F to 140°F
Humidity: 20 to 80%(non-condensing)
• Make sure beforehand that your transmission device supports the BIP or OPP profile according to the user’s
manual supplied with your transmission device.
• Bluetooth® USB adaptor (NP01BA) is for the exclusive use of our projectors.