Connecting the mediamaster, General, Connecting the mediamaster to the tv – Nokia 150T User Manual

Page 12

Advertising
background image

GB 12

CONNECTING THE MEDIAMASTER

Note the following:

• In some block of flats, the roof-mounted aerial system includes a filter and chan-

nel selector. If so, the aerial will probably not work with the Mediamaster, in
which case you should contact your landlord.

• Many older roof-mounted aerials may only receive a limited number of channels.

As a result, digital channels transmitted on higher frequencies are difficult or even
impossible to receive. The problem can be solved by replacing the roof aerial.

• Some outdoor aerials are directed towards an analogue transmitter. The aerial

must be directed towards a digital TV transmitter.

• It is not always advisable to position the aerial as high as possible. If problems

arise, experiment with different aerial heights.

2. Indoor and window-mounted aerials

This type of aerial may be enough if the reception conditions are very good. If an
indoor aerial is used, note the following:

• Use an aerial for UHF channels 21-69, e.g., a directional aerial.

• Place the aerial by the window and direct it towards the TV transmitter, if possi-

ble.

• An aerial that has an amplifier is recommended as it may provide a stronger sig-

nal.

• The strength of the TV signal varies according to reflections from buildings, etc.

The signal penetrates thick stone or concrete walls poorly. However, a wooden
building is not a big barrier for digital TV signals.

General

There are many different types of TVs, VCRs and other equipment that you can con-
nect to the Mediamaster.
In this manual, you will see some of the most common ways to connect your equip-
ment to it.

If you have problems with connecting your equipment and require assistance, con-
tact

your dealer .

SCART

Connecting the Mediamaster to the TV

• Connect a SCART cable from the main SCART socket on the TV to the TV SCART

socket on the Mediamaster.

• Connect an RF cable from the TV/VCR output on the Mediamaster to the RF

input socket on the TV.

• Connect the TV aerial to the TV AERIAL input socket on the Mediamaster.

SCART

RF

Advertising