Navi bars, Control folder, Timer – Nokia 150T User Manual
Page 22: System info
GB 22
NAVI BARS
Control folder
☛
Timer
General
You can make the Mediamaster start and stop at a predefined time.
The timer function is very useful when you want to record a programme and you
cannot start/stop the recording event yourself, or when you just want to be re-
minded of the start of a programme you do not want to miss.
Note: The timer function only works when the r eceiver is in standby .
Timer setup
• Select Channel List with
cursor left/right .
• Go to Channel to select the desired TV/Radio channel.
• Set the date using the numberl buttons on your remote control (yy/mm/dd).
• If you enter a wrong digit, you can delete it with
cursor left.
• Set the start and stop time using the number buttons on your remote control.
Start times may never overlap each other. If you try to enter a start or stop time
that already has been selected for some other period of time, you receive a warn-
ing message.
• Press
select to save or back to cancel.
• Press
back twice to leave the Navi Bars and return to viewing mode.
• Press
to put the Mediamaster in standby.
Up to 8 different events can be predefined. The events will be sorted in start time
order.
At each stop time, the box will return to standby.
You can erase a predefined event by pressing
cursor right .
• Press
back to cancel the deletion and select to delete the event.
Control folder
☛
System info
If you have to contact your service provider or a service centre, they might ask for
information available from this menu.
In this menu, you will find general information about which hardware and software
version your Mediamaster is running on.