Nokia 150T - Manual (Page 26)

GB 26
NAVI BARS
Settings folder ☛ Reinstall
To open this menu, you must enter the access code.
The access code has been set to 1234 at the factory.
NOTE: Use this option only if you must restart the installation procedure from the
beginning as
all of your previous settings, your access code, your favourite chan-
nels, etc. will be erased.
Press “Go back” to leave this menu when the warning is displayed, if you do not
want to reinstall anything.
Settings folder ☛ SW update
To open this menu, you must enter the access code.
The access code has been set to 1234 at the factory.
In order to keep the Mediamaster up-to-date, it will be possible to download new
versions of the system software (SW). New software may include new and im-
proved features for existing menus.
Enter this menu to check for new software. If new software is available, informa-
tion will be shown in the menu on how to proceed.
You may have to select a specific channel in order to download new software, which
your service provider will give you.
NOTE: If you select a new software version to download,
all of your previous set-
tings, your access code, your favourite channels, etc. will be erased. Updating may
take a while.
NOTE: Do not turn off the Mediamaster, use the remote control or disconnect the
antenna cable while downloading as this will damage the software and the receiver
will need to be sent to a Nokia Authorised Service Centre.