Nikon MOTORMESH 4300 - Manual (Page 26)

Chapter 2: Infrastructure Device Installation
July 2007
2-6
Infrastructure Device Assembly
Figure 2-4 shows the external connection points for a MOTOMESH Duo 4300 device. The figure
below it shows some examples of optional personality plugs (Black – Canopy Connect PoE, and
Standards based 802.3 af PoE Grey). A red Hardware Reset Plug (not shown below) is also available
and is used to reset a stranded 4300 device back to its factory default configuration.
Figure 2-4 Infrastructure Device Top View showing External Connection Points
Figure 2-5 External Personality Plugs (Black, Grey, Red, or none)
N-Type Antenna (5.8)
Power
Ethernet Port
N-Type Antenna (5.8)
Black plug for use
with the Canopy
Connect PoE option.
Grey plug for use with
the Standards based
802.3af PoE option.
NOTE: An optional red Hardware Reset Plug (not
shown above) is used to reset a stranded 4300 device
back to its factory default configuration. The plug looks
similar to the other Personality Plugs shown above, but
it is in red.
N-Type Antenna
(2.4)
Power ON
Indicator Light
Device Hinges
Optional PoE feature port.
N-Type Antenna (4.9,
5.4, or 5.8)
An optional External
Personality Plug are
connected here
ONLY if the
Standards based
802.3af PoE or
Canopy PoE (option)
is purchased. If
neither PoE is
purchased, the port
will be covered.
Gore Vent
A B