NEC LT150 - Manual (Page 17)

E–17
Using Remote Mouse Receiver (not supplied with the LT150/LT85 projector)
The remote mouse receiver enables you to operate your computer's mouse functions from the presentation remote control (Computer mode). It
is a great convenience for clicking through your computer-generated presentations. To return to the Projector mode, press the PJ button (lit red).
Connecting the remote mouse receiver to your computer
To use the remote mouse function, connect the remote mouse receiver to your computer with one of the remote mouse cables (USB, PS/2 or Mac
ADB) included with the optional presentation remote control kit PR50KIT. Choose the appropriate mouse cable for your computer.
NOTE: Depending on the type of connection or OS installed on your computer, you may have to restart your computer or change your computer settings.
Computer
To USB port of PC or
Macintosh
To Mouse port of PC
To ADB port of Macintosh
USB Cable
PS/2 Cable
Mac (ADB) Cable
To USB
To PS/2 or Mac
Notes on Connecting with USB Cable
* When you use an IBM PC, the PR50KIT does not support the other operating systems than Windows 98/2000.
* Do not pull out the cable from the USB port of your PC or the remote mouse receiver and then immediately insert it back into the USB port.
Allow a minimum of 5 seconds to elapse between insertion and extraction of the cable.
Doing so repeatedly can result in your PC failing to detect the remote mouse receiver.
* The supplied USB cable is designed especially for the PR50KIT. If you use the USB cable with other equipment, we do not assure the correct
functioning of the equipment.
7m
30˚
30˚
Remote sensor on the remote
mouse receiver
Presentation remote control
Remote mouse receiver
Package List of PR50KIT:
* Remote control RD-367E
* Two batteries (AA)
* Remote mouse receiver
* Three remote mouse cables (for USB, PS/2 and Mac ADB)
* Remote control case
* User's manual
When operating a computer via the optional remote mouse receiver