NEC LT150 - Manual (Page 6)

E–6
1. INTRODUCTION
Introduction to the MultiSync LT150/LT85 Projector
This section introduces you to your new MultiSync LT150 (XGA)/
LT85 (SVGA) Projector and describes the features and controls.
Congratulations on Your Purchase of The MultiSync LT150/LT85
Projector
The MultiSync LT150/LT85 is one of the very best projectors avail-
able today. The MultiSync LT150/LT85 enables you to project pre-
cise images up to 200 inches across (measured diagonally) from your
PC or Macintosh computer (desktop or notebook), VCR, DVD player,
document camera, a laser disc player or PC Card Viewer.
You can use the projector on a tabletop or cart, you can use the pro-
jector to project images from behind the screen, and the projector can
be permanently mounted on a ceiling*
1 . The remote control can be
used wirelessly.
Features you’ll enjoy:
• Simple set up and operation.
• A high-performance 130 watt NSH lamp.
• The supplied card wireless remote control that operates the pro-
jector from the front or rear.
• The image can be projected between 36 and 200 inches (mea-
sured diagonally).
• Keystone correction allows you to correct trapezoidal distortion
so that the image is square.
• You can choose between video modes depending on your source:
"normal" for a typical picture, "natural" for true color reproduc-
tion.
• The built-in PC Card Viewer allows you to start your presenta-
tion even when a PC is not available at the site.
• The "Capture" enables you to capture the current projected im-
age.
• An image can be projected from in front or behind a screen, and
the projector can even be installed on the ceiling.
• NEC Technologies’ exclusive Advanced AccuBlend intelligent
pixel blending technology - an extremely accurate image com-
pression technology - offers a crisp image with UXGA (1600
ן
1200) resolution* 3 .
• Supports most IBM VGA, SVGA, XGA* 2 , SXGA/UXGA(with
Advanced AccuBlend)* 3 , Macintosh, component signal (YCbCr
/ YPbPr) or any other RGB signals within a horizontal frequency
range of 15 to 100 kHz and a vertical frequency range of 50 to
117 Hz. This includes NTSC, PAL, PAL60, SECAM and
NTSC4.43 standard video signals.
NOTE: Composite video standards are as follows:
NTSC: U.S. TV standard for video in U.S. and Canada.
PAL: TV standard used in Western Europe.
PAL60: TV standard used for NTSC playback on PAL TVs.
SECAM: TV standard used in France and Eastern Europe.
NTSC4.43: TV standard used in Middle East countries.
• The supplied card remote control can be used without a cable,
and you can even use the optional presentation remote control
and mouse adapter to operate your PC or Macintosh mouse
wirelessly from across the room with the built-in remote mouse
receiver.
• You can control the projector with a PC using the PC Control
port*4.
• USB terminal allows USB mouse operation *5.
• The contemporary cabinet design is light, compact, easy to carry,
and complements any office, boardroom or auditorium.
• Eight pointers are available for your presentation.
*1 Do not attempt to mount the projector on a ceiling yourself.
The projector must be installed by qualified technicians in order
to ensure proper operation and reduce the risk of bodily injury.
In addition, the ceiling must be strong enough to support the pro-
jector and the installation must be in accordance with any local
building codes. Please consult your dealer for more information.
*2 An XGA image (1024
ן768) is converted into an 800ן600 crisp
image with NEC technology’s Advanced AccuBlend on LT85.
*3 A UXGA (1600
ן1200) and SXGA image (1280ן1024) is con-
verted into a 1600
ן1200 and 1024ן768 crisp image respectivery
with NEC technology’s Advanced AccuBlend on LT150.
*4 The PC Control Utility 1.0 is required. This program is included
on the supplied CD-ROM.
*5 The USB terminal meets the USB1.1 specification and accepts a
USB mouse only.
Getting Started
The fastest way to get started is to take your time and do everything
right the first time. Take a few minutes now to review the user’s
manual. This may save you time later on. At the beginning of each
section of the manual you’ll find an overview. If the section doesn’t
apply, you can skip it.