NEC LT150 - Manual (Page 38)

E–38
Noise Reduction (not available for RGB and PC Card Viewer)
You can select three levels video noise reduction.
NOTE: The lower the Noise Reduction level, the better the image quality by
way of higher video bandwidth.
Color Matrix (available for component video signal only)
First select an appropriate color matrix to fit your component signal
for HDTV or SDTV. Then select an appropriate matrix type from B-
Y/R-Y, Cb/Cr or Pb/Pr.
White Balance (not available for PC Card Viewer)
This allows you to adjust the white balance. Brightness for each color
(RGB)is used to adjust the black level of the screen;
Contrast for each color (RGB)to adjust the white level of the screen.
First use the ▲ or ▼ buttons to select R, G, or B for the brightness
and the contrast. Next use the
ᮤ or ᮣ buttons to adjust the level.
Position/ Clock (when Auto Adjust is off)
This allows you to manually adjust the image horizontally and verti-
cally, and adjust Clock and Phase.
Horizontal/Vertical Position:
Adjusts the image location horizontally and vertically using the
ᮤ
and ᮣ buttons.
This adjustment is made automatically when the Auto Adjust is turned
on. See "Auto Adjust (RGB Only) on page E-41 for turning on or off
the Auto Adjust feature.