Renesas Emulation Pod M306V2T-RPD-E - Manual (Page 21)

( 19 / 72 )
2.2 Package Components
The M306V2T-RPD-E package consists of the following items. When unpacking, check to see if
your M306V2T-RPD-E contains all of these items.
Please keep the M306V2T-RPD-E’s packing box and cushion material in your place for reuse at a
later time when sending your product for repair or other purposes. Always use these packing box and
cushion material when transporting this product.
If any of these items are missing or found faulty, please contact your local distributor. Also, if there
is any question or doubt about the packaged product, contact your local distributor.
2.3 Other Tool Products Required for Development
To bring forward programs development on the M306V2 and M306V5 MCUs, the products listed
below are necessary in addition to those contained package above. Get them separately.
To purchase these products, contact your nearest distributer.
Item
M306V2T-RPD-E emulation pod main unit
FLX120-RPD flexible cable for connecting PC4701
FLX100 flexible cable for connecting pitch converter board (pre-installed in emulation pod)
FLX-100LCC pitch converter board for connecting target system
OSC-3 (10MHz) oscillator circuit board (pre-installed in emulation pod)
OSC-2 (32.768kHz) oscillator circuit board (pre-installed in emulation pod)
OSC-2 oscillator circuit board
Hardware tool user registration FAX sheet (English)
Hardware tool user registration FAX sheet (Japanese)
M306V2T-RPD-E user's manual (this manual)
M306V2T-RPD-E user's manual (Japanese)
Quantity
1
1
1
1
1
1
1
1
1
1
1
Emulator main unit
Emulator debugger
Pitch converter board
(Required for M306V5 MCU)
PC4701
M3T-PD30
M306V5T-PTC
Programming adapter
M306V2
100D0
100P6S
M306V5
PCA7412L-100 (necessary for OSD ROM)
PCA7412F-100 (necessary for OTP version)
PCA7412L-100 (necessary for OSD ROM)
PCA7412E4S-64 (necessary for EPROM version or
OTP version)