2) connecting the cable to the emulation pod, Caution – Renesas Emulation Pod M306V2T-RPD-E User Manual
Page 39
Advertising
( 37 / 72 )
(2) Connecting the Cable to the Emulation Pod
Figure 3.15 shows how to connect the FLX120-RPD and the emulation pod.
Figure 3.15 Connecting FLX120-RPD and emulation pod
CAUTION
Note on Connecting the Cable:
• Always shut OFF power before connecting the cable. The power ON state could
destroy internal circuits.
Note on Tightening the Screws:
• After connecting the cable to the emulation pod, be sure to tighten the screws.
Advertising