Renesas Emulation Pod M306V2T-RPD-E - Manual (Page 25)

( 23 / 72 )
Chapter 3. Setting Up
This chapter describes switch settings required for using this product and how to connect this product to the PC4701 and
the target system.
3.1 Removing the Upper Cover ........................................................................................................ 24
3.2 Switch Settings ........................................................................................................................... 25
3.3 Selecting Clock Supply .............................................................................................................. 29
(1) Using the Oscillator Circuit on the Target System ............................................................... 30
(2) Changing the Internal Oscillator Circuit of Emulation Pod ................................................. 31
(3) Replacing the Oscillator Circuit Boards ............................................................................... 32
3.4 Circuits of Data Slicer I/O Signal and OSD Clock I/O Signal .................................................... 33
3.5 A-D Conversion Bypass Capacitor.............................................................................................. 35
3.6 Connecting the PC4701 and Emulation Pod .............................................................................. 36
(1) Connecting the Cable to the PC4701 .................................................................................... 36
(2) Connecting the Cable to the Emulation Pod ......................................................................... 37
3.7 Connecting the Target System .................................................................................................... 38