Replacing a battery during a call – Radio Shack CT-503 User Manual

Page 13

Advertising
background image

13

To see a more detailed indication of the battery’s charge level
at any time, press

. The battery strength meter ap-

pears on the display for about 5 seconds. Read this meter in
the same way.

When battery power becomes low, the phone displays

Lo

bAt

and sounds a warning tone every few seconds. When

power becomes too low for the phone to operate, it automati-
cally turns off. Recharge the battery as soon as possible.

Note: Rechargeable batteries last longer and perform better
if occasionally allowed to fully discharge. You can do this by
leaving the phone on until the phone automatically turns off or
you can use the battery discharge feature of any approved
accessory available for your phone. Do not try to discharge
the battery by any other means.

REPLACING A BATTERY
DURING A CALL

If you have an extra charged battery and the currently in-
stalled battery becomes low during a call, follow these steps
to change the battery without ending the call or losing the
connection.

1. Tell the other party on the line what you plan to do (tell

them, for example, that they will hear some noise as you
remove the battery and you will call back if for any rea-
son you lose the connection).

FCN

4

GHI

17-1112.fm Page 13 Wednesday, July 21, 1999 2:34 PM

Advertising