Radio Shack CT-503 - Manual (Page 34)

34
CHANGING A NUMBER IN MEMORY
1. Recall the number that you want to change.
2. Repeatedly press to backspace and erase digits,
then enter the correct numbers; or simply add digits to
the existing number. Then press
and enter the two-
digit location number.
3. The selected location number and FULL appear briefly,
then the phone displays the currently stored number fol-
lowed by
ChAngE? .
Press again within 2 minutes to store the edited
number. The memory location number appears on the
display to confirm the entry.
To exit without changing the number, press .
CLEARING A MEMORY
1. Press , then enter the two-digit memory location
number you want to clear.
2. The selected location number and FULL appear briefly,
then the phone displays the currently stored number fol-
lowed by
ChAngE? .
To clear the selected memory, press . The selected
memory location number appears on the display to con-
firm the entry.
To exit without clearing the selected memory, press .
CLR
STO
STO
END
CLR STO
STO
END
17-1112.fm Page 34 Wednesday, July 21, 1999 2:34 PM