RocketFish ROCKETBOOST RF-RBWHP01 - Manual (Page 21)

21 RF-RBWHP01
To pair an existing Rocketboost network:
1 Set the HUB switch on the docking station to DISABLE.
2 Press and hold the POWER button on the your Rocketboost Hub device for
more than three seconds to put it into pairing mode. The power
indicator starts blinking rapidly and the unit will stay in pairing mode for
30 seconds.
3 Press and hold the CONNECT button on the docking station for more than
three seconds so the Hub device and docking station enter pairing
mode.
• The power indicators light steadily if the pairing was successful.
• The power indicators blink slowly if the pairing was not successful.
4 Press and hold the POWER button on the your Rocketboost Hub device for
more than three seconds to put it into pairing mode. The power
indicator starts blinking rapidly and the unit will stay in pairing mode for
30 seconds.
5 Press and hold the CONNECT button on the headphone for more than
three seconds so the Hub device and headphone enter pairing mode.
• The power indicators light steadily if the pairing was successful.
• The power indicators blink slowly if the pairing was not successful.
Docking station
(HUB: DISABLE)
Rocketfish sender/receiver
RF-RBAUX or other Rocketboost
device. (HUB: ENABLE)
Headphones
RF-RBUSB
(HUB: DISABLE)
RF-RBWHP01_11-0883_MAN_V2.fm Page 21 Tuesday, October 18, 2011 11:04 AM