RocketFish ROCKETBOOST RF-RBWHP01 - Manual (Page 22)

22
Listening to the digital wireless stereo headphones
To listen through the headphones:
1 Set the headphone volume level to the minimum.
2 Turn on the headphones and docking station. Make sure that your
docking station and headphones are wirelessly “paired.”
The power indicators light steadily if the docking station and
headphones are paired and blink slowly if they are not. If they are not
paired, see “Establishing communication” on page 18.
3 Put your headphones on your head. Adjust the angles of the left and
right ear pieces until you feel comfortable.
4 Turn on your audio source and begin playback.
If there are multiple sources in the Rocketboost network, press the
SOURCE button on the headphones to find the source you want to listen
to. The TX indicator on the docking station (if it is a hub) blinks several
times, indicating that the current audio source is changing.
5 Adjust the headphone volume to your normal listening level.
Caution: Continuous use at high volume may permanently damage your hearing.
Notes :
- If the system is connected to an A/V receiver with an external amplifier, turn off the
amplifier to prevent hearing sound from the amplifier speakers.
- If the system is connected to a TV, turn off the TV sound to prevent hearing sound
from the TV speakers.
Turning off the system
To turn off the system:
1 Set the POWER ON/OFF switch located on the headphones’ left earpiece to
OFF.
2 Press the POWER button on the docking station. The power indicator on
the docking station goes off.
RF-RBWHP01_11-0883_MAN_V2.fm Page 22 Tuesday, October 18, 2011 11:04 AM