RocketFish ROCKETBOOST RF-RBWHP01 - Manual (Page 24)

24
No sound • Check the volume level of the headphones or audio sources connected to
the docking station.
• Make sure that all of the cables are connected correctly. Make sure that the
power indicators of the headphones and docking station are lit solidly. If
the indicators are blinking green, see “Establishing communication” on
page 18.
• Make sure the sender or receiver devices are not set to Mute.
• Check if the audio source has internal/external speaker settings that allow
the internal speakers to be turned off and for the sound to be heard from
the external source (your headphones). If this is the case be sure your audio
source is not set to Mute.
• To maximize your volume level through the system, make sure your audio
source (for example, an A/V receiver, MP3 player, etc.) has it’s volume
turned up to at least 50% of their volume level.
Sound interference • Move the docking station slowly to find the best reception position for your
headphones.
• Shorten the distance between your headphones and the docking station.
The maximum distance is 115 feet (35 m).
• Make sure all of the cables are connected correctly to the Rocketboost
devices.
• It is possible other devices like cordless phones, microwaves, wireless
routers, etc. may be causing interference. Try turning one device off at a
time to determine which device is causing interference.
• If your cordless phone or wireless router is causing interference try
changing the channel it is using. Please refer to your device’s owner
manual.
No communication
between the
headphones and
docking station • Make sure that the AC adapter is connected to the docking station.
• Make sure that the headphone batteries are installed correctly.
• Make sure the headphone batteries are charged.
The headphones and docking station power indicators turn on after the
headphone switch is set to ON and the POWER button on the docking station is
pressed.
• If they are lit solidly, a communication link has been successfully
established between the system.
• If they are blinking on one or both devices, see “Establishing
communication” on page 18.
There is sound
coming from the
audio source • Turn off the internal speakers of your audio sound source. Contact the
manufacturer of the audio sound source, such as your TV, for support.
Problem Solution
RF-RBWHP01_11-0883_MAN_V2.fm Page 24 Tuesday, October 18, 2011 11:04 AM