ROTEL RDV-1040 - Manual (Page 7)

7
TV
Y P B P R
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Manufacured under license from Digital Theater Systems, Inc. US Pat. No 5,451,942, 5,956,674,
5,974,380, 5,978,762, and other world-wide patents issued and pending. "DTS" is a registered
trademark of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital Theater Systems, Inc. All
Rights Reserved
PRODUCT COMPLIES WITH DHHS RULES
21 CFR SUBCHAPTER J IN EFFECT AT DATE
OF MANUFACTURE. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D
symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works.
Copyright 1992 - 1997 Dolby Laboratories, Inc. All rights reserved.
Y
VIDEO OUT DIGITAL OUT AUDIO OUT
COMPONENT
VIDEO
S-VIDEO
PCM/STREAM
COAXIAL
OPTICAL
LEFT
RIGHT
P R P B Apparatus Claims of U.S.
Patent Nos.4,631,603,
4,577,216, 4,819,098 and
4,907,093 licensed for
limited viewing uses only.
CLASS 1
LASER PRODUCT
Component video cable
Red Green
Blue
Red Green
Blue
Audio Cable
White
Red
Red
White
VIDEO
AUDIO
RIGHT
LEFT
IN
S-VIDEO
S-video cable
Composite Input TV Connection
Connect the COMPOSITE VIDEO output
to the composite video input of your TV. Con-
nect the ANALOG AUDIO
outputs to the
audio inputs of your TV. A cable for these con-
nections is supplied.
If your TV has a single monaural audio input
instead of a pair of stereo inputs, you need to
use a “Y” cable adapter to connect the two output
channels of the RDV-1040 to the single input.
You can improve the sound quality of the sys-
tem by connecting the audio outputs to a separate
hi-fi audio system. (See the following section.)
If your TV has an S-video input, you should
connect it with the S-VIDEO
output of
RDV-1040 using an S-video cable in addition
to the standard video cables. This will produce
better picture quality.
NOTE: The Composite Video outputs
should not be connected when the Compo-
nent and/or S-Video outputs are connected.
Component Input TV Connection
If your TV has component video signal input
jacks you will get better video performance by
using the COMPONENT VIDEO
output
jacks of the RDV-1040. The required cable is
not provided. Be sure to connect the “Y” out-
put to the “Y” input, “P
B ” output to the “P B ” input,
and the “P
R
” output to the “P
R
” input.
If your TV has an S-video input, you should
connect it with the S-VIDEO
output of
RDV-1040 using an S-video cable in addition
to the standard video cables. This will produce
better picture quality.
NOTE: If you do not connect the S-Video
cable between the two components some
functions of your TV may not work.
You can improve the sound quality of the sys-
tem by connecting the audio outputs to a separate
hi-fi audio system. (See the following section.)
NOTE: The component signal inputs on
some TV’s have BNC type connectors. (BNC
connectors are coaxial connectors that have
keyed locking collars.) In such instances
adapters or a special cable may be
needed.
English
NOTE: When the Component Video outputs are connected to an NTSC television you may
be able to use the Progressive Scan mode of the RDV-1040 which produces a picture with
less flicker. See the Remote/480p/480i Output Signal Selector Switch section. Not appli-
cable to PAL televisions.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Manufacured under license from Digital Theater Systems, Inc. US Pat. No 5,451,942, 5,956,674,
5,974,380, 5,978,762, and other world-wide patents issued and pending. "DTS" is a registered
trademark of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital Theater Systems, Inc. All
Rights Reserved
PRODUCT COMPLIES WITH DHHS RULES
21 CFR SUBCHAPTER J IN EFFECT AT DATE
OF MANUFACTURE. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D
symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works.
Copyright 1992 - 1997 Dolby Laboratories, Inc. All rights reserved.
Y
VIDEO OUT DIGITAL OUT AUDIO OUT
COMPONENT
VIDEO
S-VIDEO
PCM/STREAM
COAXIAL
OPTICAL
LEFT
RIGHT
P R P B Apparatus Claims of U.S.
Patent Nos.4,631,603,
4,577,216, 4,819,098 and
4,907,093 licensed for
limited viewing uses only.
CLASS 1
LASER PRODUCT
Audio/video cable
S-video cable
White
Red Yellow
Red
White
Yellow VIDEO
AUDIO
RIGHT
LEFT
IN
S-VIDEO
TV