ROTEL RDV-1040 - Manual (Page 8)

8
Amplifier or Receiver
AUDIO
RIGHT
LEFT
IN
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Manufacured under license from Digital Theater Systems, Inc. US Pat. No 5,451,942, 5,956,674,
5,974,380, 5,978,762, and other world-wide patents issued and pending. "DTS" is a registered
trademark of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital Theater Systems, Inc. All
Rights Reserved
PRODUCT COMPLIES WITH DHHS RULES
21 CFR SUBCHAPTER J IN EFFECT AT DATE
OF MANUFACTURE. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D
symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works.
Copyright 1992 - 1997 Dolby Laboratories, Inc. All rights reserved.
Y
VIDEO OUT DIGITAL OUT AUDIO OUT
COMPONENT
VIDEO
S-VIDEO
PCM/STREAM
COAXIAL
OPTICAL
LEFT
RIGHT
P R P B Apparatus Claims of U.S.
Patent Nos.4,631,603,
4,577,216, 4,819,098 and
4,907,093 licensed for
limited viewing uses only.
CLASS 1
LASER PRODUCT
Audio Cable
White
Red
Red
White
RDV-1040 DVD Player
Connecting to an Audio
Amplifier or Receiver
You will get better sound quality if you con-
nect the audio outputs of the RDV-1040 to a
high quality amplifier or receiver and use com-
ponent loudspeakers, rather than those built
into the television.
Connect the AUDIO OUTPUTS of the
RDV-1040 to any high level input (such as AUX,
DVD, CD, etc.) of an amplifier or receiver.
Connecting to Audio
Equipment with a Digital Input
You can enhance the sound quality by connect-
ing the OPTICAL DIGITAL OUTPUT
or CO-
AXIAL DIGITAL OUTPUT of the RDV-1040
to the digital input of an amplifier, DAT or MD
by using an optional digital cable. The digi-
tal stereo audio signal from a disc is directly
transferred. If you connect the unit to a Dolby
Digital or DTS decoder or an amplifier with
built-in decoder by using an optional digital
cable, you can enjoy high-quality surround
sound.
When you make the digital connection, also
make the analog connection, because, depend-
ing on the disc type, no audio may be repro-
duced from the DIGITAL OUTPUT.
With the digital connection, the Preference
menu settings for COMPRESSION and DOWN
MIX are disabled. Settings for these items must
be made from the decoder.
IMPORTANT NOTE ABOUT
DIGITAL SIGNAL CONNECTION:
The Digital Audio Output setting in the Au-
dio Preferences on screen display must be
properly set for the type of output being
used when using an optical or coaxial digi-
tal signal connection. If this preference set-
ting is not done correctly, loud noise may be
generated which can damage the speakers.
Before using the RDV-1040 with a digital
signal connection be sure the proper type of
Digital Audio Output has been selected. See
the Audio Menu information in the Prefer-
ences Setting section of this manual.
Optical Connection
Coaxial Connection
Digital equipment
IN
OPTICAL
DIGITAL
IN
AUDIO
RIGHT
LEFT
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Manufacured under license from Digital Theater Systems, Inc. US Pat. No 5,451,942, 5,956,674,
5,974,380, 5,978,762, and other world-wide patents issued and pending. "DTS" is a registered
trademark of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital Theater Systems, Inc. All
Rights Reserved
PRODUCT COMPLIES WITH DHHS RULES
21 CFR SUBCHAPTER J IN EFFECT AT DATE
OF MANUFACTURE. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D
symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works.
Copyright 1992 - 1997 Dolby Laboratories, Inc. All rights reserved.
Y
VIDEO OUT DIGITAL OUT AUDIO OUT
COMPONENT
VIDEO
S-VIDEO
PCM/STREAM
COAXIAL
OPTICAL
LEFT
RIGHT
P R P B Apparatus Claims of U.S.
Patent Nos.4,631,603,
4,577,216, 4,819,098 and
4,907,093 licensed for
limited viewing uses only.
CLASS 1
LASER PRODUCT
Optical Digital Cable
Audio Cable
White
Red
Red
White
Digital equipment
IN
COAXIAL
DIGITAL
IN
AUDIO
RIGHT
LEFT
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Manufacured under license from Digital Theater Systems, Inc. US Pat. No 5,451,942, 5,956,674,
5,974,380, 5,978,762, and other world-wide patents issued and pending. "DTS" is a registered
trademark of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital Theater Systems, Inc. All
Rights Reserved
PRODUCT COMPLIES WITH DHHS RULES
21 CFR SUBCHAPTER J IN EFFECT AT DATE
OF MANUFACTURE. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D
symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works.
Copyright 1992 - 1997 Dolby Laboratories, Inc. All rights reserved.
Y
VIDEO OUT DIGITAL OUT AUDIO OUT
COMPONENT
VIDEO
S-VIDEO
PCM/STREAM
COAXIAL
OPTICAL
LEFT
RIGHT
P R P B Apparatus Claims of U.S.
Patent Nos.4,631,603,
4,577,216, 4,819,098 and
4,907,093 licensed for
limited viewing uses only.
CLASS 1
LASER PRODUCT
Optical Digital Cable
Audio Cable
White
Red
Red
White