Random access adjustment mode – Runco DTV-992 User Manual
Page 26
Peaking
Peaking improves the contours in a projected image. Highlight PEAKING
by pushing the control disc up or down and press ENTER to toggle the
peaking between OFF and ON. During the creation of new settings for a
RGB source the peaking is switched to OFF.
Color Select
Highlight COLOR SELECT by pushing the control disc up or down and
press ENTER to display the color select menu.
Use the control disc to highlight a color (CRT) or combination of colors to
display the projected image in that specific color.
To select a new color, press ENTER, the color selection menu appears.
Clamp Tuning
Highlight CLAMP TUNING by pushing the control stick forward or back-
ward and press ENTER to toggle between NORMAL and RESTORATION.
Select Normal :
- for all standard sources and all sources with a bac porch > 0.8ms,
- for sources with noise and spikes in the signal.
Select Restoration
- for standard sources with a backporch between 0.4 ms and 0.8 ms,
- for sources with sync separate or sync on Green.
Port 2 : Video or S-Video
Port 2 can be used as a Video or S-Video input.
Highlight Port2 by pushing the control stick forward or backward and
press ENTER to toggle between VIDEO and S-VIDEO.
6-4
Random Access Adjustment Mode
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
PEAKING :
Select with
<ENTER> to accept
<EXIT> to return.
or
OFF
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
Select with
<ENTER> to accept
<EXIT> to return.
or
COLOR SELECT
COLOR SELECT
RED
GREEN
BLUE
RED AND GREEN
BLUE AND GREEN
RED AND BLUE
Select with
<ENTER> to accept
<EXIT> to return.
or
ENTER continues to the color select menu.
EXIT will return to Internal Crosshatch Selection or Setup
Pattern Selection Menu.
ADJUST returns to operational mode.
ENTER continues to the color select menu.
EXIT will return to Internal Crosshatch Selection or Setup
Pattern Selection Menu.
ADJUST returns to operational mode.
COLOR BALANCE
SYNC : FAST
PICTURE
PICTURE TUNING
TUNING
Select with
or
then
<ENTER>
<EXIT> to return.
PEAKING
CLAMP TUNING : normal
LINE DOUBLER : ON
PICTURE
PICTURE TUNING
TUNING
COLOR BALANCE
LINE DOUBLER : ON
Select with
or
then
<ENTER>
<EXIT> to return.
PORT2 : S-VIDEO
PICTURE TUNING