RCA LDK 5481 - Manual (Page 18)

v4.0
LDK 5481 + LDK 4700 User’s Guide | DigiLink Adapter 2-8
2.5 Attaching the LDK 5481 adapter to a camera head
The LDK 5481 adapter is shorter than a standard adapter. Before attaching the LDK 5481
adapter to a camera, the carrying handle must be re-positioned on the camera head using the
mounting bracket supplied with the adapter.
To re-position the carrying handle for a short adapter, proceed as follows:
1. Remove the viewfinder and any other adapter attached to the camera.
2. Unscrew and remove the two screws that attach the front of the carrying handle to the
camera. (For the LDK 500: tilt the carrying handle backwards and use your fingertips to
gently unplug the flat cable that connects the zoom control to the connector inside the
camera body.)
☞
Note
The digital zoom control of the LDK 500 cannot be used in combination with the LDK 5481
adapter. An optional analogue zoom control LDK 6113 can be used.
3. Remove the carrying handle from the camera.
4. Use the supplied screws and washers to attach the mounting bracket to the top of the
camera. (Use the screw holes where the handle was previously attached.)
Figure 2-1. Carrying handle replacement
5. For LDK 500: fold the flat cable away into the hollow part of the carrying handle.
6. Place the carrying handle into the recess at the front of the mounting plate and use the
two original screws to secure it in place.
7. Attach the LDK 5481 adapter to the camera (refer to section “Attaching an adapter” in the
User’s Guide of your camera for further instructions).
Clea r
ND1/4
ND1/1 6
ND1/6 4
Clear
Star 4P
Star 6P
Soft Focus
VT R
Save
Ext.
Iris
Std.
File
Po we r
On
1
2
3
4
A
B
C
D
Smart
card
(2x)
Po we r
Of f
Clea r
ND1/4
ND1/1 6
ND1/6 4
Clear
Star 4P
Star 6P
Soft Focus
VT R
Save
Ext.
Iris
Std.
File
Poweron
1
2
3
4
A
B
C
D
Smart
card
(2x)
Power
Of f
Clea r
ND1/4
ND1/1 6
ND1/6 4
Clear
Star 4P
Star 6P
Soft Focus
VT R
Save
Ext.
Iris
Std.
File
PowerOn
Of f
1
2
3
4
A
B
C
D
Smart
card
Power
(2x)