Setting port aliases – RCA Fibre Channel Switch User Manual
Page 23
Advertising
Setting port aliases
16 April, 2003
Fibre Channel Switch
23
Setting port aliases
You can configure NetCentral to set the reporting name of each port on your QLogic
SANbox2 Switch to something meaningful to you. When NetCentral reports the
status of a port, or notifies you of a problem, you may find it convenient to see a name
that you chose
To set port aliases:
1. Select the switch you want to configure in the NetCentral List View or Facility
View.
2. Choose
Device | Port Settings
for that device. The Port Settings dialog box opens.
3. Select the Port Alias for each port in turn and enter the desired alias. The figure
shows modified aliases for Port #0 through Port #7.
4. Click
OK
to set the aliases.
Advertising