Regency I31-NG3 - Manual (Page 14)

14 Regency I31-3 Gas Fireplace Inbuilt
BAROSSA CURVED
FRONT INSTALLATION
1) Install bottom louver by matching the holes in louver bracket with holes
in firebox frame and secure using 2 screws on each side.
2) Pull down louver.
3) Fix brackets onto firebox, one on each side using 1 screw per side.
4) Fit plates on back of screen into brackets on top of firebox. Press
in to secure from top.
Secure bracket
with screw.
5) Secure bottom of screen using 1 screw on each side into the
brackets fixed onto the firebox in step 3.
Brackets on firebox.
6) Close louver.
INSTALLATION
Secure louver by using 2 screws.
Secure
with screw.