Radio Shack 43-5560 - Manual (Page 10)

In
s
ta
lla
ti
o
n
10
4. Plug the telephone line cord into the
telephone outlet.
5. For a wall plate,
align the base’s
keyhole slots
with the wall
plate studs and
slide the base
downward to secure it.
For direct wall
mounting, align
the base’s
keyhole slots with
the mounting
screws and slide
the base downward to secure it.
C
ONNECTING
/C
HARGING THE
B
ATTERY
P
ACK
The phone comes with a rechargeable
nickel-metal hydride (Ni-MH) battery pack in
the handset, but not connected. Before
using your phone, you must connect the
battery pack, then charge it for about 15–20
hours.
1. Press down and slide off the battery
compartment cover.
2. Lift the battery pack out of the
compartment.
3. Plug the battery pack’s connector into
the socket in the compartment (the
connector fits only one way), then place
the battery pack in the compartment.
4. Replace the cover.
To charge the battery pack, place the
handset on the base. The
CHARGE indicator
on the base lights.
To remove, push up
a tab on the wall
mount adapter as
shown.
43-3580.book 10 ページ ２００４年１月２６日 月曜日 午前１０時１９分