Radio Shack 43-5560 - Manual (Page 26)

M
a
king
and Rec
e
iving Calls
26
P
LACING A
C
ALL ON
H
OLD
1. During a call, press INTCM/HOLD . The
call will be put on hold.
Ô
2. To talk to the caller, press TALK/FLASH
or SPEAKER . The phone will return
back to the call.
R
EDIALING A
C
ALL
The last three phone numbers dialed can be
quickly redialed from the handset. Redial
numbers stored in the handset are
independent from each other. Ô
1. With the phone in standby mode, press
the REDIAL soft key.
2. Press VOL/RING/ or VOL/RING/ to
scroll through the last three dialed
numbers.
3. Press TALK/FLASH or SPEAKER on the
handset. The selected number is
dialed.
4. To hang up, press END .
Deleting a Redial Record
1. With the phone in standby mode, press
the REDIAL soft key.
To hang
up Press END or return the handset to
the cradle (Auto Standby).
To enter a
pause
within the
dialing
sequence When you dial the number in standby
mode, press the PAUSE soft key.
P
appears in the display, which
represents a pause.
From the Handset
Normal
conversation
Hands-free
conversation
Ô
NOTES
Ô
Placing a Call on Hold
• While a call is on hold,
CIDCW can not be
received.
• If you leave a call on
hold for more than ten
seconds, the display
screen will read,
Line
On Hold .
Redialing a Call
• If the number exceeds
32 digits, only the first 32
digits are retained in
redial memory.
• If the redial memory is
empty, you will hear a
beep.
43-3580.book 26 ページ ２００４年１月２６日 月曜日 午前１０時１９分