Radio Shack 43-5560 - Manual (Page 24)

S
e
tting M
enu O
p
tions
24
Setting Voice Mail Tone
Voice Mail Tone sets the voice mail tone. If
your service does not support SDT
message signal, set your VMWI (Visual
Message Waiting Indicator) not to detect
SDT message signal.
1. Press MENU soft key. Select the Global
Setup menu, and then the Voice Mail
Tone Submenu.
2. Press VOL/RING/ or VOL/RING/ to
set the voice message indication (SDT
message signal) to
On or Off .
3. Press the OK soft key. You will hear a
confirmation tone.
Deregister the Handset
Deregister HS clears the handset’s ID from
the main base unit and the base ID from the
handset. You will usually only deregister the
handset if you are having a problem with
your phone.
1. In standby mode, select Deregister HS
in the menu and press the OK soft key.
Deregister HS? appears.
2. Press VOL/RING/ or VOL/RING/ to
select Yes and then the OK soft key.
When de-registration is complete you
will hear a confirmation tone, and
Deregistration Complete
appears.
3. After deregistering the handset, place
the handset to the base to register. You
must reregister the handset before you
can use it.
43-3580.book 24 ページ ２００４年１月２６日 月曜日 午前１０時１９分