13 rf-rbusb – RocketFish RF-RBUSB User Manual

Page 13

Advertising
background image

13

RF-RBUSB

3

Volume
buttons (device)

Press to adjust the volume on Rocketboost devices that support volume
control (for example, RF-RBWS02 wireless outdoor speaker). The wireless
sender/receiver is a line-level device, so volume controls are not supported
on it. In that case the volume on the local amplifier or powered speakers
connected to the wireless sender/receiver must be adjusted when
listening to the wireless sender/receiver line-level out.

4

BASS button

Press to enable/disable the BASS enhancement. (This wireless
sender/receiver does not support BASS boost, but the remote control can
be used on other Rocketboost products that do support it.)

5

USB In

Press to listen to the audio from the device connected to the USB jack of
your wireless sender/receiver.

6

Line In

Press to listen to the audio from the device connected to the LINE In jack
of your wireless sender/receiver.

7

Volume
buttons (stream)

Press to adjust the volume of all devices receiving the same audio stream.

8

(mute - all)

Press to mute all audio streams in your Rocketboost network. Pressing
mute again at any Rocketboost wireless receiver will “unmute” the stream
that was last heard at that wireless receiver. This stream can now be heard
from any other wireless receiver that was receiving that stream. Other
streams are unmuted in the same way: pressing mute again at each
wireless receiver will unmute the stream that was last heard at that
receiver.

9

Next Source button

Press to select different audio streams on your Rocketboost network. Each
press moves to the next source.

#

Feature

Description

/

/

RF-RBUSB_11-0204_MAN_V1.fm Page 13 Monday, May 2, 2011 8:04 AM

Advertising