RocketFish RF-RBUSB - Manual (Page 18)

18
Connecting power to the wireless sender/receiver
To connect the power:
1 Connect the AC power adapter to the wireless sender/receiver and
plug into an AC power outlet. The wireless sender/receiver
automatically turns on and the power indicator turns green or blue,
depending on the hub status switch position.
Notes :
- Make sure that the AC power outlet matches the wireless
sender/receiver’s AC input (100-240V) before connecting.
- Connect the AC power adapter to an AC power outlet only after all
other connections are completed.
Setting up and using your remote control
To set up and use your remote control:
1 Remove the insulation sheet in the battery tray before using the
remote control for the first time.
RF-RBUSB_11-0204_MAN_V1.fm Page 18 Monday, May 2, 2011 8:04 AM