Raymarine Wind & Close Hauled Wind Instrument ST60 - Manual (Page 14)

2 ST60 Wind & Close Hauled Wind Instrument Owner’s Handbook
Digital display
The digital display shows the following wind and speed information:
• True/apparent wind speed.
• Velocity made good (VMG).
• Tack heading.
• Maximum wind speed.
• Wind alarm data.
You can select which information is displayed. When power is first switched on,
the digital display shows the same type of information as was selected when
power was last turned off.
Note: The TRUE and APP indicators flash for 8 seconds after power is switched on. This is
a function of the remote control system and can be ignored if remote control is not being
used.
1.2 Normal operation
Use the Basic operation and Using the disp key flow charts in this Chapter, to
operate your ST60 Wind and ST60 Close Hauled Wind instruments.
TACK
TRUE APP
TRUE APP
VMG
KTS
Momentarily
press the
required
key
Tack
heading
Velocity made
good
Press to toggle between True &
Apparent indications on ST60 Wind
Refer to the flow chart Using the disp key
Basic operation
D4314-2