Radio Shack 4-in-One Smart Light-Up Remote Control - Manual (Page 10)

10
DELETING LEARNED
FUNCTIONS FROM SMART
KEYS
You can delete learned functions from the
smart keys (
1s , 2s , 3s , and 4s ) to make room for
other functions.
1. Hold down P until the red light blinks twice.
2. Press 9 7 6 . The red light blinks twice.
3. Press the device key ( TV , VCR , CBL , or
AUX ) where the learned function resides.
4. Press the smart key you programmed with
the function twice to delete the learned
function. The red light blinks twice.
CONVERTING DEVICE KEYS
You can use the 4-in-One Smart Light-Up to
operate a second TV or VCR (or other compo-
nents) for a total of up to four devices. To do
this, you must first convert an unused device
key (
TV , VCR , CBL , AUX ) to operate each addi-
tional device. For example, to convert AUX to
operate a second TV:
1. Hold down P until the red light blinks twice.
2. Press 9 9 2 . The red light blinks twice.
3. Press TV .
4. Press AUX . The red light blinks twice.
5. Program the converted device key ( AUX )
with the code for the second TV. (See
“Setting Up Your Remote Control” on
Page 6.)
Repeat these steps for each key you want to
convert. To convert a key back to its original
15-1993.fm Page 10 Wednesday, October 20, 1999 12:03 PM