Radio Shack 4-in-One Smart Light-Up Remote Control - Manual (Page 6)

6
ies. This can press keys for an extended period
of time and reduce the battery life.
DEVICE TYPES
You can use the remote control's device keys
to control the following types of devices:
TV — TVs
VCR — VCRs and TV/VCR combinations
CBL — Cable converters, satellite systems
AUX — CD Players, Home Automation
SETTING UP YOUR REMOTE
CONTROL
1. Refer to “Manufacturer Codes” on Page 17
and write down the codes for your brand of
device on the 4-in-One’s label.
Note: Some manufacturers have several
codes listed. Try each until you find the
right one. See “If You Have Problems” on
Page 14 if you cannot find the correct
code.
2. Press the device key for the type of remote
you are replacing ( TV , VCR , CBL , or AUX ).
The red light blinks.
3. Hold down P until the red light blinks twice,
then enter the 4-digit manufacturer's code.
For example, to replace a Panasonic TV's
remote control (manufacturer's code
0051), press
TV , hold down P until the red
light blinks twice, then press 0 0 5 1 .
When the red light blinks twice, the remote
control has accepted the code.
Note: If the code you entered is invalid,
the red light blinks.
15-1993.fm Page 6 Wednesday, October 20, 1999 12:03 PM