Radio Shack 43-329 - Manual (Page 19)

19
Te
le
ph
on
e
O
pe
ra
tio
n
Mute
The mute function allows you to hear the other party
but the other party cannot hear you.
During a call, press MUTE/REMOVE on the handset.
The handset screen shows MUTED for a few seconds
and MUTE appears until the mute function is
turned off.
Press MUTE/REMOVE again to resume the
conversation. The handset screen temporarily shows
MICROPHONE ON
.
Ringer Mute
When the telephone is ringing, press OFF/CLEAR or
MUTE/REMOVE to temporarily silence the ringer without
disconnecting the call. The next call rings normally.
Call Waiting
When you subscribe to call waiting service from your telephone company,
you hear an alert tone if there is an incoming call while you are on another
call.
Press
/FLASH to put your current call on hold and take the new call.
Press /FLASH at any time to switch back and forth between calls.
Find Handset
Use this feature to page all system handsets.
Press FIND HANDSET on the telephone base. All
idle handsets ring and the screens show
** PAGING **.
To end paging, press
/FLASH, , any dialing
keys (0-9, #, *), or press FIND HANDSET on the
telephone base.
1.
2.
1.
2.
PHONE 0:00:00
MUTED
MUTE
PHONE 0:00:00
MUTED
MUTE
RINGER MUTE RINGER MUTE