Replace a handset, Ad di ti on al i nf o – Radio Shack 43-329 User Manual

Page 40

Advertising
background image

40

Ad

di

ti

on

al

I

nf

o

Replace a Handset

If you want to replace a handset or re-assign the designated handset

number of a registered handset, you must de-register all the handsets and

then individually register each handset.
To make de-registration easier, read all of the instructions on this page

before you begin.

To de-register all handsets:

Press and hold FIND HANDSET on the telephone base for about 10

seconds (until the IN USE light on the telephone base turns on and

starts to flash), then release FIND HANDSET.
Press and release FIND HANDSET again. You must press

FIND HANDSET while the IN USE light is still flashing. The IN USE light

flashes for approximately seven seconds.
All system handsets show CONNECTING... The de-registration process

takes about 10 seconds to complete. All handsets show
NOT REGISTERED

when the de-registration completes.

If de-registration fails, you might need to reset the telephone and try again.

To reset:

Pick up the registered handset and then press

/FLASH.

Press OFF/CLEAR and place the handset back in the telephone base.

-OR-

Unplug the power from the telephone base, then plug it back in.

n

Note: You cannot de�register a handset if any system handset is in use.

1.

2.

3.

1.
2.

1.

Advertising
This manual is related to the following products: