Expand your telephone system, Add and register a handset (optional), Ad dit io na l i nfo – Radio Shack 43-329 User Manual

Page 39

Advertising
background image

39

Ad

dit

io

na

l I

nfo

Recycle Rechargeable Batteries

Placing rechargeable batteries in the trash can be harmful to the

environment. Instead, recycle old rechargeable batteries at your

local RadioShack store free of charge. RadioShack participates in

the RBRC© battery recycling program, and is committed to

preserving the environment and conserving natural resources.

Call 1-800-THE-SHACK (1-800-843-7422) for more information.

Expand Your Telephone System

The handsets provided with your telephone system are pre-registered. Each

handset is assigned a number that shows on the handset display. Additional

handsets registered to the telephone system are assigned in sequential

order. For instance, if the telephone system already has HANDSET 1 and

HANDSET 2, the new registered handset is assigned HANDSET 3. This

telephone system accommodates up to 12 handsets.

Add and Register a Handset (Optional)

You can add new handsets to your telephone system, but each handset

must be registered with the telephone base before use. When first

purchased, each expansion handset shows NOT REGISTERED. You may need

to charge the handset before registering to the telephone base. For more

details on battery charging, see the table on page 6.

To register a handset:

Place the unregistered handset in the telephone base or charger. If
PRESS FIND HS 4 SEC ON BASE

does not appear on the handset

screen after a few seconds, remove the handset and place it in the

telephone base or charger again.
On the telephone base, press and hold FIND HANDSET for about four

seconds (until the red IN USE light on the telephone base turns on) and

then release the button. The handset shows PLEASE WAIT... and it takes

about 10 seconds to complete the registration. The handset shows
HANDSET X REGISTERED

(X represents the handset number assigned)

and you hear a beep when the registration completes.

n

Notes:

If the registration fails, the handset shows NOT REGISTERED. To reset

the handset, remo�e the handset from the telephone base and place it

back in. Try the registration process again.
You cannot register a handset if any other system handset is in use.

1.

2.

Advertising
This manual is related to the following products: