Raritan Engineering Command Center CC-SG - Manual (Page 115)

C HAPTER 7: A DDING U SERS AND U SER G ROUPS 99
Add User to Group
To manage users with similar privileges, you can assign them to groups. When you add a user to
any group, you are assigning the group’s privileges to that user (please see the section Add User
Group in this chapter for more information about groups).
1. Click on the Users tab and select a group (the Group icon displays multiple people and a User
icon displays a single person).
2. On the Users menu, click Add User To Group. The Add User To Group screen appears.
Figure 123 Add User To Group Screen
3. Click on the Username drop-down arrow and select a user from the list to add to the group
shown in the User Group Name field.
4. Click OK to add the selected user to the group or Cancel to exit without adding. An Added
Successfully To User Group message confirms that the user has been added to a group.
5. Repeat steps 1 through 4 to add more users to this or to other groups.
Delete User from Group
This command removes a user from a specific group, but not from the system. If a user is not
assigned to any other group, that user is moved to Users Not In Group, a non-specific category
shown at the base of the Users tree.
1. Click on the Users tab and select a user to be deleted.
2. On the Users menu, click Delete User From Group. The Delete User From Group screen
appears.
Figure 124 Delete User From Group Screen
3. Click OK to delete the user or Cancel to exit without deleting. A Deleted Successfully From
Group message confirms that the user has been deleted from the group.
4. Repeat steps 1 through 3 to delete other users from this or other groups.
Default User Groups
A CC-SG is shipped with these default user groups:
• System Administrators—user group in which ccroot resides. The account
ccroot
is a
special type of super-user Administrator, which is always authenticated locally by CC-SG.
Users in this group have all privileges as listed in Appendix D: User Group Privileges, but
the privileges cannot be changed. Users in this group can also manage (add, edit, delete) users
and user groups. Policies can be applied to users in this group to provide access rights to ports.
• CC Users—initially has only the Ports Access privilege, but the privileges can be changed in
this group. Policies can be applied to this group to provide access rights to ports.
Note: The Users Not in Group is technically not a user group but can be considered as a
“holding area” for users until they are moved into another group.