Raritan Engineering Command Center CC-SG - Manual (Page 188)

172 C OMMAND C ENTER S ECURE G ATEWAY A DMINISTRATOR G UIDE
Connection Mode
When connected to a device, you have the option to pass data back and forth directly with that
device (Direct Mode) or to route all the data through your CC-SG unit (Proxy Mode). While
Proxy Mode increases the bandwidth load on your CC-SG server, you only need to keep the CC-
SG TCP ports (80, 443, and 2400) open in your firewall. See Raritan’s Digital Solution
Deployment Guide for additional information.
1. On the Setup menu, click Configuration Manager. When the Configuration Manager
screen appears, click on the Connection Mode tab.
2. Click on the radio button for the connection mode you prefer.
a. Click on the Direct Mode radio button to connect to a device directly.
b. Click on the Proxy Mode radio button to connect to a device via your CC-SG unit.
Figure 209 Configuration Manager Connection Screen – Direct Mode or Proxy Mode
c. Click on the Both radio button if you want to connect to some devices directly, but others
through Proxy Mode. Then specify settings for the devices you wish to connect to
directly:
i. Type your client IP Address in the Net Address field at the base of the screen.
ii. Type your client net mask in the Net Mask field.