Raritan Engineering Command Center CC-SG - Manual (Page 72)

56 C OMMAND C ENTER S ECURE G ATEWAY A DMINISTRATOR G UIDE
Backup Device Configuration
Use this command to back up all user configuration and system configuration files. If anything
happens to your system, you can restore your previous configurations from memory.
Note: Only for Dominion SX 2.5 devices or later, network settings, such as IP address, subnet
mask, IP gateway are not included in the backup file.
1. Click on the Devices tab and select a device from the Devices tree.
2. On the Devices menu, click Device Manager, and then click Backup Device Configuration.
The Backup Device Configuration screen appears.
Figure 61 Backup Device Configuration Screen
3. Click OK to back up the device configuration or Cancel to exit without backing up. A
Device Configuration Backed Up Successfully message confirms that device configuration
has been backed up.
4. Repeat steps 1 through 3 to back up other device configurations.
Restore Device Configuration
This command allows you to restore a previously backed-up device configuration.
1. Click on the Devices tab and select a device from the Devices tree.
2. On the Devices menu, click Device Manager, and then click Restore Device Configuration.
The Restore Device Configuration screen appears.
Figure 62 Restore Device Configuration Screen
3. Click on the Backup Date drop-down arrow and select a date from the list of when you last
made a back up of the device.
4. Click OK to restore the back up or Cancel to exit without restoring.
5. When the Restart message appears, click Yes to restart the device or No to close the window
without restarting. A Device Configuration Restored Successfully message confirms that all
user and system configuration data has been restored.
6. Repeat step 1 through 5 to restore other devices’ configurations.