Rosen Entertainment Systems RVR 2000 - Manual (Page 15)

17
Rosen Entertainment Systems
ROSEN USER INTERFACE (RUI) MENU
The DVR source is supported by the Rosen User Interface
(RUI). To bring up the RUI for the DVR, while in the DVR source,
press the SYSTEM MENU button on the remote, highlight the
“SourceCtrl” option and press ENTER. The DVR’s RUI can be
used to play and pause the internal DVD for manual recording
purposes, toggle the display of record and playback information,
and toggle the available zoom modes.
RUI as it appears on the screen:
The DVR can be used to record video from the internal DVD
player of a Rosen T10/T12 overhead all-in-one system. It can
also be used to playback recorded video, video transferred from
a PC, music, and picture fi les.
INSTALLING THE DVR
Open the screen of the T10/T12 overhead system to reveal the
DVR door. Slide the DVR latch to the left to release the door.
Place the DVR inside the door slot with the Rosen logo facing
downward and the connection jack pointing upward towards the
unit. Slide the DVR into the door slot, making sure that it is
fl ush with the bottom of the door and centered. Slide the DVR
carefully, until it connects to the jack. Close the DVR door. If
seated properly, the door should have no problem closing
fl ush to the underside of the T10/T12. If the door does not
easily close or is not fl ush, carefully re-seat the DVR and
try again.
SELECTING AND USING THE DVR
Press the SOURCE button on the remote control or the Control
Panel Module (CPM) until the DVR main screen appears with
the “DVR” on screen display (OSD) appearing in the upper left
hand corner of the screen. Using the UP/DOWN/LEFT/RIGHT/
ENTER keys navigate the DVR menu and select and enable the
available features for recording and playback. ENTER will enter
a menu or submenu, while STOP on the remote, or EJECT on
the CPM will return you to the previous menu or submenu.