Rosen Entertainment Systems RVR 2000 - Manual (Page 17)

19
Rosen Entertainment Systems
DVR AUTO-RECORDING
Auto-recording to the DVR is only allowed for recording and
archiving of DVDs which you own. There are three available
quality modes for auto-recording. Auto-record allows you to
record an entire DVD movie without having to monitor its prog-
ress or manually control the DVR. Auto-recording is disabled
by default and to use it, you must enable it through the RUI in
the “Internal DVD” source. Select “Internal DVD” and press the
SYSTEM MENU button on the T10/T12 remote control or press
and hold the DOWN button on the CPM for 2 seconds. Navigate
to the “Auto REC” option and press ENTER repeatedly until the
desired record quality is shown, then exit the menu.
Auto-recording should now be enabled and will be activated
once the main movie has begun. Auto-recording will ignore all
introductory screens and previews.
Insert a disc and start the movie at the DVD’s root menu. Within
a few seconds of the start of the main movie, the “RECORDING”
OSD should begin fl ashing and will continue to fl ash every 2
seconds and the DVR status LED will fl icker red.
The system will have limited function during an auto record ses-
sion to prevent unwanted activity.
The following remote control functions are still available during
auto-record:
1. DISPLAY mode and COLOR adjustment
2. Daytime/Night-time Brightness
3. Dome light
4. Speaker (FMT or FMM control)
5. STOP (interrupts the Auto Record session)
During an Auto-Record session if the system is turned off, re-
cording will be interrupted and the status will be stored until the
system is turned back on. When the system turns back on, the
Auto-Record feature will attempt to sync as closely as possible
where it left off and resume recording. However, due to the
interruption and the nature of video encoding to a hard drive, a
new fi le will be created. Therefore, interrupted Auto-Records will
results in a separate video for every interruption. For example, if a
2-hour movie was interrupted 3 times during a recording session,
then 3 video fi les will be created in a unique folder which can be
easily identifi ed and renamed to match the nature of the content.
To playback the entire movie that consists of separate fi les, just
highlight the folder and press PLAY. At the end of a recorded
segment, it will automatically buffer and play the next segment.
Notes about Auto-Recording:
1. Auto-recording will not activate on any movie or segment
that is less than 15 minutes in length. This prevents unwanted
recordings of previews and introduction screens. For recording of
movies or clips less than 15 minutes in length, manual recording
using the DVR source is recommended.