Radio Shack CT-400 - Manual (Page 15)

15
RECEIVING A CALL
When the phone receives an incoming call, it rings
and flashes
CALL . To answer a call, press any key
except .
Notes:
• After the first ring, if you subscribe to calling
line ID service through your cellular carrier
(see “Calling Line ID” on Page 31), the phone
automatically displays the calling party’s
phone number. The phone will also display the
caller’s name if the name and number are pro-
grammed into your phone (see “Storing a
Number and Name in Memory” on Page 48).
• If you selected silent service (see “Ring Vol-
ume” on Page 36), the phone does not ring.
Instead, the keypad and display backlights
flash,
CALL flashes on the display (or caller
information appears), and the phone beeps
once.
• If keyguard is set to ON (see “Turning Key-
guard On/Off” on Page 24), you can answer a
call only by pressing
.
To end the call, press . To clear calling line ID
information from the display (if any), press .
W
P
R
SEND
END
CLR
17-1101.fm Page 15 Wednesday, July 21, 1999 9:57 AM