Radio Shack CT-400 - Manual (Page 41)

41
USING CALLING CARD DIALING
Storing/Clearing a Calling Card
Number
The calling card feature lets you store a long-
distance calling card number in the phone’s memo-
ry, so you can place long-distance calls from this
phone using that number.
Follow these steps to select a calling card type and
enter your calling card number.
1. Press , then repeatedly press or
until the phone displays CALLING CARD .
2. Press . The phone prompts you for your 4-
digit lock code ( LOCKCODE? )
3. Enter your 4-digit lock code, then press .
The phone displays the type of the last card
selected, or
NO CARD if no card carrier has
been selected.
Note: If you enter the wrong lock code, the
phone displays
CODE ERROR . Start again at
Step 1 and enter the correct code.
4. Find your long distance card carrier and ac-
cess number in the following table. Then re-
peatedly press
or until you see your
carrier’s card type, then press .
MENU
OK
OK
OK
17-1101.fm Page 41 Wednesday, July 21, 1999 9:57 AM