Radio Shack CT-400 - Manual (Page 44)

44
2. When you hear the carrier’s calling card tone
or voice prompt, press . CARD CALL ap-
pears on the display, then the phone prompts
you to wait for another tone or voice prompt
(
WAIT FOR PROMPT ).
3. When you hear the next tone or prompt (if
any), press again, then continue with the
call as you normally would.
Notes: This procedure might not apply to all calling
card options. For more information, look at the
back of your calling card or contact your long dis-
tance carrier.
USING TOUCH-TONE SERVICES
To use your cellular phone to control answering
machines and special telephone services (such as
bank-by-phone or voicemail), simply enter touch-
tone commands using your phone’s keypad after
the service answers.
Or, you can store the service’s command se-
quence in a speed-dial memory (see “Storing a
Number and Name in Memory” on Page 48), then
follow these steps after the service answers.
1. Recall the memory that contains the command
sequence.
2. Press . The phone sends the com-
mands as touch tones.
SEND
SEND
MENU SEND
17-1101.fm Page 44 Wednesday, July 21, 1999 9:57 AM