Radio Shack CT-400 - Manual (Page 43)

43
Note: To exit without changing the calling card
settings (if you are changing only the access
number, for example), press
.
6. Enter the card number, then press .
The phone briefly displays STORED to confirm
that the selected card information is activated
and stored.
To clear a stored calling card number, follow Steps
1–4 and select the setting
NO CARD in Step 4. The
phone erases all card information and exits the
menu.
Using a Stored Calling Card Number
Follow these steps to make a long-distance call us-
ing the calling card number you stored.
1. Enter the desired area code and phone num-
ber, then hold down until the phone dis-
plays CARD CALL and IN USE . CARD CALL
remains on the display until the access num-
ber is sent to the network, then the phone
prompts you to wait for a tone or voice prompt
(
WAIT FOR PROMPT ).
Note: If no calling card is stored in memory,
the phone makes a normal call to the phone
number you entered.
CLR
OK
SEND
17-1101.fm Page 43 Wednesday, July 21, 1999 9:57 AM